Hip to be square: Italeri/Fabbri 1/100 Mil Mi-8 review

Used by soldiers, spooks and warlords the world over, Mil's Mi-8 Hip is probably the world's most produced helicopter (although Bell's Huey is another contender for the title if the whole 204/205/212/214 family is included). Yet, much like the CH-47 Chinook, it is not very well represented in 1/100 scale.

QRF make two resin and white metal models in their modern 15mm range: the Mi-8TV Hip C armed transport and the Mi-8TVK Hip E attack variant. While I own neither, I do have a few of the 1/100 diecast Hips released by Italeri/Fabbri a while back. These were made in two civilian liveries: an Aeroflot one or a Maldives-based Hummingbird Helicopter one and I can heartily recommend them although they are sadly getting harder to find at reasonable prices.

Chobham gypsy wagon : QRF 15mm up-armoured Warrior review

Along with the Challenger 2 (reviewed here) my last order from QRF included a trio of MCV80 Warrior with Chobham which is the FV510 Warrior in its wartime configuration with large slabs of Chobham applique armour added to the front and  sides.

This configuration was first seen in Operation Granby and also used in Kosovo and Operation Telic. For a mid-eighties vehicle both QRF and Skytrex make the vanilla Warrior, while Old Glory UK has an updated version of the Warrior with WRAP 2 ERA package hidden in its modern infantry listing.

The QRF Warrior is nice and chunky with very few parts: a hull, two track pieces, a turret and two side skirts. Overall detail is good as is the quality of casting. The frontal Chobham block is a little on the thick side, thick enough in fact that the driver would hardly see over it but this isn't really noticeable unless the model is viewed from the side and held at eye level. The side skirts might be a little on the thin side and could be thickened with plasticard but they look the part and I left these alone. As you can see in the photos, the track to hull fit needs a little filler but that is not much of an issue since it is mostly hidden behind the armoured skirts.

QRF 15mm Modern British infantry review

As I wanted to field a modern British infantry platoon for Force on Force, I looked at the then-available ranges, namely Old Glory’s and QRF’s before selecting the latter.

The Old Glory range seemed adequate (although some of the poses are hit or miss as usual with OG) but the packaging made me pass them over. Not only is the actual pack content unclear but ordering something like 150 figures and using 1/3^rd to field a platoon didn’t seem like a really good idea even though OG’s per figure prices are quite competitive. Flytrap Factory has since released a pack of “Royal British Marines” which look good but are limited to small arms at the moment.

On to QRF’s figures! These are sold in packs of 8 figures covering the whole gamut of smallarms and support weapons which has the advantage of minimizing the number of leftovers. While the photos on QRF’s website do give an good idea of the content of each pack, they are not very detailed. The close up photos at the bottom of this post should give you a clearer idea of what they look like.

15mm CH-47 Chinook testbed

As indicated here, I ordered the fuselage of an RC toy Chinook to check its compatibility with 15mm and was pleasantly surprised to see that it was in fact the correct size.

Here is a closer look at the beast which was quickly slapped together without too much care. It is still lacking engines and wheels which are on their way to me. Rotors also need to be added and I plan to use clear acetate disks to represent them. These will be held to the model with rare earth magnets in order to make storage easier and swap them from model to model.

Searching for an affordable 1/100 CH-47 Chinook

Lil' Flying Fokker Chinook

As a general rule, I use 1/144 models for flying gunships and air support with 15mm figures. However, transports helicopters which are depicted on the LZ obviously need to be in the same scale as the figures. While quite a few 1/100 helicopters can be found from a variety of sources, one of the most glaring omissions is an affordable CH-47 Chinook suitable for use with 15mm figures.

Basically, if you want to have a model of the workhorse of Operation Enduring Freedom your choice is limited to Lil' Flying Fokker's very nice but expensive CH-47 Chinook. This a resin and metal kit which looks outstanding but carries a hefty price tag of £30 which, alas, is far more than I am prepared to pay for a model.

While browsing eBay, a photo of a Chinook toy caught my eye : the Syma S026G radio-controlled micro helicopter which looked to be about the right size. Interest suddenly picked up because the seller's description included a fuselage length which appeared to be reasonably close to 1/100. However, paying the same price as the LFC kit for a toy and then gutting it wasn't really an attractive option.

On the other hand, spare parts for this toy are widely sold and it is possible to buy the body separately. This is actually quite cheap (about $7 US) and one was promptly ordered to check its usefulness as the base for a 15mm model. And the good news is that the fuselage actually measures 16,5 cm by 3,6 cm which makes it 1/94 in length and 1:105 in width, i.e. well within the usual variations found in 15mm vehicle scales. The result of my tinkering with the toy can be found over at the Chinook testbed post.